Determine the Place
First, it is important to find out where the leak is coming from in order to repair the same. See if it’s coming from the engine or the brakes, is it motor oil or is it the valve that is leaking. Here’s what you do, place a cardboard under the car, covering the entire car and mark it―that is the different tires, the engine etc., on to the cardboard. Now leave it overnight. When you check in the morning, you’ll see where the leak is coming from. The part that is leaking will form an oil patch on the cardboard.
Check for Valve
Check if the valve covers are tight. See if you can find any leaks there. Start by making sure that the valve cover bolts are tightened. You will need a proper socket wrench or screw driver for that. When you tighten all the valve bolts, it will probably be all that was needed for the leakage to stop.
Use a Solvent
In order to find any other leaks you’ll have to spray and clean other areas to determine if they are leaking as well. Do this by spraying the areas that might leak with carburetor cleaners or degreaser cleaners.
Check the Oil Pan
See that the oil drain plug is not stripped and is tight. If you find a hole in the oil pan it could be due to running over a rock. The remedy for this is to screw a bolt (of the proper size) into the oil pan. It can also be repaired by a steep putty. After this, make use of a socket wrench to check and verify whether all the bolts that attach the engine and the oil pan are tight.
Check the Oil Filter
Another probable cause for an oil leak could be due to the oil filter. The leak might be happening due to the oil filter not being properly installed or because the oil filter has bent, maybe due to off road driving. This will require you to change the oil filter. The faster the better. The more you wait, the more the unburned gasoline will drip into the engine oil and make it leak.
You might adopt all these steps if you know how to carry out some car maintenance yourself. However, if you are not aware of any repairing whatsoever, it is better to get the help of a professional mechanic. Do not in any way, dissemble a part or screw in something that you know nothing about. You might end up making the situation worse and have to pay much more than what you would’ve been required to pay, had you gone to a mechanic in the first place. And the repair cost which is a little high to begin with (in the range of $ 500 to $ 2000) depending on the part that has got a leak, will be even higher if you tamper with it yourself.
So now that you know a few things about oil leak repair, it will be easier to take control of what would’ve seemed to be a hopeless situation.
When it comes to automotive repairs, transmission issues are among the most feared. Often expensive and difficult to address, they can take any truck out of commission for protracted periods. Like all mechanical problems, catching them early can save motorists time and money. With that in mind, here are the five most common signs you need truck transmission repair.
1. Delayed Response
Your vehicle’s transmission system was designed to move power from the engine to the drive shafts and wheels as quickly as possible. When it cannot perform this primary function, something is wrong. In most cases, the problem starts out as a slight hesitation in acceleration. You might step on the gas pedal and have to wait half a second before the vehicle gets moving. Shifting issues that result in a delay before the gears engage are also quite common. The most likely culprit for these issues is a bad clutch. When ignored, the damage will inevitably get worse in both automatic and manual trucks. Not to mention the fact that it can be dangerous to drive an unresponsive vehicle.
2. Strange Sounds
Although noises differ based on vehicle size, make, and even model, these particular sounds are impossible to miss. Because they are often the result of failing metal parts, you will hear loud humming, buzzing, whining, or clunking sounds. Noises may occur at regular or irregular intervals and will almost always get worse the longer you drive. Because transmission parts are interconnected, a problem can spread quickly throughout the system. As such, it is vitally important that you get noises checked out as soon as humanly possible.
3. Low Fluid/Leaking
One of the most common reasons for breakdowns, low or leaking transmission fluid robs your vehicle of lubrication and even hydraulic function. The inevitable result is an engine that will either seize up or stop working completely. The good news is that both issues are fairly easy and inexpensive to address. If, for example, you spot bright red fluid on your driveway, it means you have a leak, which can then be easily repaired before there are further problems. Low fluid levels can also cause truck transmission repair problems, but they can often be avoided with regular service.
4. Shaking Or Grinding
Although they might shake and shimmy more than cars, trucks are not supposed to violently jerk and vibrate during operation. They also shouldn’t make any grinding sounds. Both issues are almost always caused by gear problems. Depending on when the noises and/or movements occur, the damage could point to either a bad clutch or worn out gear synchronizers. As the damage gets worse, transitions into different gears will become more jarring and may involve violent shaking that can be dangerous. For obvious reasons, the vehicle should be taken to an automotive expert immediately.
5. Check Engine Light
There are literally dozens of reasons why the check engine light on your dashboard could suddenly come on. Although car drivers often ignore this warning sign for months on end, truck owners must be more responsible. Because the light often indicates a potential truck transmission repair issue, it is important to have the problem diagnosed straight away. Nearly any automotive expert can do exactly that with a diagnostic scan tool that lets them know which part needs attention.
Truckers can save time and money on costly repairs when they heed these common warning signs.
Every automobile owner will tell you that maintenance is critical. By taking care of your vehicle, you can dramatically increase its lifespan. There are some car parts that should be at the forefront of your mind during road trips or even your daily commute. Here are five automobile components that need to be replaced frequently.
Some manufacturers suggest you change your spark plugs every three years in order to keep your vehicle running smoothly. Engine idling, engine misfiring, high fuel consumption, engine surging, or a lack or acceleration all indicate that it’s time for new spark plugs.
In order to see properly and drive safely at night, you need working headlights. As technology changes, owners have seen a decrease in the frequency of replacing the car parts associated with headlights. That is because more manufacturers are using LED technology, which outlasts traditional lamps. Of course, these do cost more, so when the time comes to replace the bulbs, you probably will spend a little more money if you have a newer vehicle.
Depending on the brand of your tires, you could have to replace them after as little as 30,000 miles of travel. You should regularly check the tread for signs of wear. If you place a penny in between the treads of a tire and can see the head of Abraham Lincoln, then the rubber has worn down too much.
In addition, if you have a newer vehicle with a tire pressure monitoring system, you will eventually need to replace this component. Over time, the sensor will wear out. This system offers significant benefits, as it warns drivers when the pressure is too low. Even though the replacement of this system adds to an automobile’s maintenance pricetag, many choose to pay the extra price.
Stopping your vehicle takes its toll. Brake pads eventually wear down and have to be replaced. In order to avoid incurring additional expenses, you should have your pads replaced at the first sign of wear. This could be a noise or noticing that it takes more pressure or time to come to a complete stop. If you wait too long, not only will you have to replace the pads, but you may also have to replace the rotors underneath.
New technology is making it so that your vehicle’s battery does not have to be replaced every three years. However, even if you have a five-, seven-, or ten-year battery, you should make sure the battery gets testing during your annual maintenance tune-up. By checking it annually, you can replace the battery before it dies, avoiding the hassle of finding your automobile dead one morning.
There are many different car parts that you will eventually have to replace. However, these five are the most common and will need to be changed more often than other components. If you perform regular maintenance on your automobile, it will last for years.
For those trying to save some money in the household budget, consider purchasing used parts for your vehicle repairs. New parts can often be astronomical in price. In many cases, used parts will work just as well. They can be found at different salvage yards or at a car dealer. Before jumping into the world of used auto parts, first do some research to make sure to get the best deal.
Know Exactly Which Part is Needed
Once you find out there is an issue with the vehicle, it is necessary to either inspect the problem or have a mechanic determine what is needed to repair the car. Auto components usually need to be make and model specific. When shopping used, make sure to have all the information that is needed. If it is possible, bring the old piece when shopping, so there is no confusion as to what the vehicle will require.
Know What the New Purchase Price Would Be
Before shopping, take a few minutes and research the price of those new components if they are purchased new. This way, it will be easier to know whether or not the used is provided at a good deal. Make sure to have a printed copy of the price on hand when looking, just in case it may be necessary to negotiate a better price with the dealer.
Make Sure Returns Are Possible
One of the first questions that needs to be asked before paying for a used component is whether or not it can be returned it if it breaks or quits performing. Many auto salvage centers or a trusted car dealer will offer a 30-day money back or exchange policy. If the retailer does not offer any type of warranty, consider trying other sources that do have a return policy.
Maybe New is Better
Some parts are often better if purchased new. Vital components, like alternators, brake rotors, and others that have a tendency to wear out over time are overall more economical if purchased new. It can be risky buying some items used since it typically cannot be known how long they were used in the previous vehicle before they were sold to someone else. The vehicle may stop working after three months, which means a new component will have to be purchased, so it may have been less expensive to break down and buy it new in the first place. Auto parts that are typically considered safe to purchase used include fuel pumps, brake drums, air conditioner compressors, and CV joints.
Purchasing used auto parts from a salvage center or car dealer can be a big money saver, but they can also cost more if you careful research is not done ahead of time. Make sure to shop around different salvage yards, swap meets, a used car dealer, or classified ads to get the best deal. Most of all don’t be afraid to ask a lot of questions before handing over the cash.
Purchasing used cars is a great way to save money, but some may feel as if they are not as nice looking as brand new vehicles. Many pre-owned vehicles are in excellent condition both cosmetically and mechanically. Proper maintenance of both the inside and outside can add more life to the car and keep it looking great. For those who feel as if their used cars are in need of a little sprucing up, consider some of these tips.
Clean the Interior
Keeping the interior of the vehicle clean is one of the best ways to spruce up used cars. Pull everything out from the inside and the trunk, and vacuum the carpeting and seats thoroughly. Don’t forget to catch the corners, crevices, and anywhere else that dirt can collect. Remove the cup holders and wipe down the hard surfaces. Use an antibacterial cleaner to disinfect the steering wheel, handles, and all buttons, including the radio. Take some time to remove any stains on the upholstery using some upholstery cleaner.
Clean the Engine
A clean engine makes cars run more efficiently and look much nicer. Every month, wipe off any build-up with a shop towel. Spray a degreasing agent on the cloth and carefully wipe the outside of the engine. It is also possible to power wash the engine, but be careful not to get water into other elements under the hood.
Clean the Door Wells
Door wells are not an area that often comes to mind when sprucing up a vehicle. It is, however, the first part that people see when opening the door. This area can get very messy and unattractive. Grime and dirt can build up quickly, so take some time to clean it out. Spray the door wells with all purpose cleaner. Allow it to sit for a few minutes, and then wipe them down with a dry cloth.
Clean the Headlights
Over time, the headlight covers can become very foggy, making used cars look less attractive. A yellow film builds up on the headlights and prevents the lights from working as well. There are a few options to fix this problem. Professionals can refinish the lights using a specialized technique and professional products. Replacing them is also an option if they are in especially bad condition. There are also headlight cleaning kits available for the owner to clean them.
Taking a few moments each month to spruce up used cars can make it seem as good as new. In addition to general maintenance, these tips will make it look and feel like new for years to come.
Although most motorcycles are designed in such a way to withstand rigorous riding activities, they eventually succumb to engine trouble, chassis as well as drive wear and tear. Different manufacturers offer established guidelines as to how their motorbike brands should be maintained as well as an approved list of products to use. However, as much as each brand has it own maintenance routine, there are several basic maintenance tips that apply to any motorcycle. We have compiled top motorcycle maintenance tips to make your bike serve you for more days.
Observes standard maintenance intervals
It is essential that you make sure your motorbike functions optimally by strictly observing the manufacturers manual. Prior to going on a ride make sure that your indicators, brakes, lights as well as tires are in perfect condition. It is also important to check the chain tension and lubricate on a monthly basis. At the onset of two months, inspect your control cables and make the necessary adjustments. Replace the engine oil as well as the filter then clean the air filters together with the spark plugs. Other important factors that you should investigate on a regular basis depending on how you use your bike include the fluid level of the brake oil, the condition of brake pads and lines, and see whether your front folk oil needs replacement. In addition, make sure that you check it properly before storing it for winter.
Invest in high quality parts
It is advisable to invest in parts that are of high quality. Also be sure to use the engine oil, break fluid as well as the oil filter that the manufacturer has recommended for your bike. Although most break fluids for most bikes are usually not interchangeable, you can get after-market filters which can be cleaned and showcase better airflow and usually work better than the manufacturer’s filters.
Problems to be wary of
Although leaks are a common problem for most motorcycles, they should not be ignored, each time you notice a leak from your bike you should take it over for servicing. If you know how to do it yourself then address the issue as fast as possible. Once you notice any possibly dry rotting signs as you inspect your fuel lines, have them replaced with immediate effect.
Call in the pros
Consider taking your bike for regular maintenance and servicing by an expert technician. A technician who is familiar with your bike model is in a better position to help you. If your motorcycle is damaged in any way, you can get motorcycle repair services at any local garage.
When you choose to ride motorcycles over driving cars, you’re choosing more than a lifestyle, you’re choosing absolute freedom. However, figuring out where to obtain one can get a bit tricky, especially if it’s your first purchase. Check out these easy tips on how to get into riding motorcycles.
Chances are you know someone who rides motorcycles for pleasure. So the first thing you want to do is ask them where they got theirs. They might say Craigslist, a friend, or a local dealer. Listen to what they have to say. Referrals are one of the most common ways to connect riders to their rides.
Don’t forget to check online reviews for dealerships. Customers tend to speak more frankly on websites like Yelp, which can provide some useful information about where they bought their bikes. However, don’t let the opinions of others be your sole source of information. Conduct a little research and have fun while doing it!
Check Your Local Dealer
You can find local dealers with a simple Google search. Look up “used motorcycles in (insert city),” and your search engine will provide you with a list of dealers. Google has gotten so sophisticated that it knows how to narrow choices down to places you’re likely to visit anyway. So give it a try, you never know what’s out there until you look.
Quick Tip: Take a stroll around town. It’s fun to bring some friends along for the ride, and maybe you can include them in your search too. Who knows, maybe you have an aficionado or two in your circle and you just don’t know it.
Test rides are the most fun part about shopping for motorcycles. You get to ride the machines you couldn’t afford otherwise, while also finding the right fit. The best part about it is, you won’t have a salesman talking you into something you really don’t want. So get out there and have some fun with a test ride or two.
Just like cars, motorcycles usually come with options to finance. A dealership may offer in-house financing, or they might be connected to a local bank you can trust. Either way, don’t be intimidated to look just because you don’t have a few thousand dollars burning a hole in your pocket. Ask the salesperson on duty about financing your purchase!
Most motorcycles get gas mileage that’s equivalent many electric cars. In fact, most bikes get 80-90 mpg! Filling up the tank is cheap, too, since they’re so small. Riding your bike is not amazing to just your soul; it’s also amazing to your wallet!
Vintage motorcycles are being collected by the millions of enthusiasts from around the world. They might only ride them for leisure, and love to take care of their precious collections. These motorcycle enthusiasts get a great sense of satisfaction, when they are able to restore the old antique bikes to good working condition.
You will also come across some interesting people who find pleasure in building the whole motorcycle from the scratch. The only problem with the vintage bikes is that the parts can be tough to come by, mostly because the companies will have stopped their manufacturing.
Online Shopping: The Best Way to Purchase Vintage Motorcycle Parts
As you may know, some motorcycle enthusiasts spend long hours looking for the parts for their vintage motor bikes. They hunt tirelessly around the antique stores in their neighborhood and at online stores, until they find what they want for their motorcycles.
By shopping online, you can now sit in the comfort of your own home or office, and browse different kinds of antique models and motorcycle parts available. No more of visiting garage sale, boot sale, estate sale and motorcycle repair shops on weekends. However, when you are purchasing antique motor bike parts online, it is important that you do proper research on the type of part that you want.
It is necessary that you gather as much information as you can, before investing on the parts you want. You could also get information from the sellers. There are many websites that provide detailed information on all the products that they sell along with the pictures. They also label their items on sale with NOS, ‘new on shelf’ or ‘new old stock’. This means that the particular product is unused and was on shelf for a long time.
Thoroughly go through their catalogue, check specification of the items you want, compare prices, and look for discounts, if any. You must also go through their return and shipment policies carefully. Besides this, also find out how they accept payment. Is it COD, online banking or debit or credit card payment?
Once you’ve finalized the spare part, check with them whether it is in working condition or not. Buying something, which is of no use, is a complete waste of money. You could also call them up or use their online chat support service to clear any doubt that you might have regarding the products on sale.
So why own a motorcycle? Riding is one of those fun activities people like doing during their free time. But different people have different reasons for riding. The thrill that comes with riding a motorcycle is one of the most exhilarating experiences you can get. In case you are considering getting a bike, here are some of the top reasons why you should.
High speed and power
Most motorcycles offer drivers incredible speeds that are quite impossible to match compared to average car models. If you are a rider that has a craving for remarkable speed, then a bike showcasing a powerful engine with large capacities is ideal for you. With the various developments in technology, bikes today are available in different colors, designs as well as styles. You can easily shop for the best one that satisfies your engine, drive, speed as well as transmission needs. You can go for test drives to test the capacities of different bikes available. Once you find the ideal bike for you, you will find yourself rushing out to get a second one.
If you drive around in your car a lot you may be struggling with keeping up with bizarre fuel prices. This is however not the case with bikes, they have the potential of getting to as fast as eighty miles per gallon guaranteeing you tangible fuel efficiency. Beginners are encouraged to enroll for a bike safety course so they can learn how to lengthen their miles per gallon in a safe way. However, fuel efficiency is dependent upon your engine size, as well as your bike design. If you are getting a bike solely to improve on fuel efficiency, then you should go for plastic models designed to better your aerodynamics.
Moving around in a bike is much easier as compared to using a car. One with a small engine is considered most ideal for riding around urban areas that are highly congested. Essentially, this is a clever way of avoiding long traffic jams that are usually the cause of tardiness. Also with a bike you can have the ultimate riding experience as you enjoy various scenic areas or regions. If you fancy travelling, a bike is a great way of touring around and enjoying a fun-filled adventure.
Owning a classic bike also communicates your unique sense of style and personality. However, they are high priced than average models so you have to factor that in when considering your options when purchasing a motorbike.